The composition and structure of the LED display.
LED displays have become a part of our lives in many different places around us, such as airports, large shopping malls, sports fields and billboards. Taking into account the components and structure of the LED display, its design and construction leave a deep impression. The following will briefly introduce the basic composition and structure of the LED display, and understand its perfect combination of engineering and creativity. The LED display screen consists of three parts, namely LED, content source, and controller. And the display also includes several LED display unit boards, which are connected to each other to form the main body of the LED display. After connecting to all unit boards, content can be displayed seamlessly. The control system can be divided into two parts: the video processor and the video control system, which are hardware and software respectively. The LED controller has different functions, mainly depending on the size of the display, the content of the light source and the requirements for use. The content source can be input devices such as computers, camcorders, DVD players, etc. The structure of the LED display. The LED display contains several different components that work together to present content to the audience. Although the display screens also have different status quo and sizes, they all have the same basic components inside. Whether it is indoors or outdoors, it is composed of independent LED display screens. The light-emitting diode panel includes a rack, a power supply, a transceiver card, and an LED module. Each module includes diode, driver IC and PCB. The light-emitting diode panels are connected to each other to produce mutually connected light-emitting diodes. The console receives the content and sends a signal to the LED panel. If the source content and the displayed aspect ratio are different, you need to adjust the content according to the source and controller. The video wall composed of all these LED dis
Read More
What should I do if the LED display has color difference?
With the rapid development of domestic technology in the field of LED screens, LED display products are used in various applications in daily life. As a green and energy-saving outdoor high-density LED display, it has a wide range of applications and can be seen everywhere in the market. The brightness color cast of outdoor high-density LED displays has become a key concern for customers. The brightness and size of the LED display are mainly affected by the quality of the LED lamp beads. When the LED display heat is not exhausted well or unevenly, it is likely to cause common failures of the LED lamp. In order to ensure that the color of the information displayed on the LED display screen and the color of the playback source remain extremely uniform, the actual effect of white balance is one of the most important indicators of the LED display screen. The size of the visibility angle affects the audience of the LED screen, therefore, the larger the LED display, the better. The uneven loss rate of the red, blue and green LED lights is likely to cause deviations in the LED transparent screen. The size of the visual angle of view is critically affected by the packaging method of the core tube. Because the brightness of the LED lights is different, it is likely to cause flickering of the screen. There are many types of outdoor high-density LED screens. Outdoor environmental protection, energy-saving, high-brightness, convenient LED displays and other products are very rich. The regulations on displays in various fields are also the same. Therefore, when customers are distinguishing the quality of LED displays, they should choose the display. In the case of the screen, you must choose according to your own needs to ensure that the functions of this product meet your own needs. In recent years, LED display products have been used more frequently, resulting in a market trend of high demand. The rapid development of the market is mainly driven by the demand for LED
Read More
What is the cause of the flower screen phenomenon on the LED display?
Half of the outdoor LED display or the phenomenon of blurry screen is caused by the following two factors. 1. The outdoor LED display has no display or half of the display. In the LED display, only half of it is a common fault. Of the content that must be displayed, usually only part of it is displayed, which affects the advertising content and store brand image. Generally, there are many factors that cause this fault condition, such as: the internal power circuit line is aging, which causes the circuit line to be cut off, resulting in a part of the display module not receiving all normal power supply; or the LED driving characteristics are relatively poor, which makes it impossible to work well or Abnormalities often occur during work, resulting in the current supply cannot always be balanced. In view of this situation, it is necessary to dismantle and commutate the matching switching power supply route, so that the internal current power supply network of the display screen can be connected and supplied normally, and dismantle and replace the rated drive during unstable or abnormal operation, so as to ensure that the current of each phase is normal. Distribution, so as to obtain a smooth operation. 2. Part of the outdoor LED display has a false screen. One of the common faults is that a part of the LED display screen has a flickering fault. Because the customer is not a professional, the phenomenon of screen flickering often causes many problems to the customer. The main reason for this failure is: due to the long-term application of the LED display, the internal transmission data route is aging or the module board is caused. The quality of the drive is not good and unstable. At this time, the matching aging accessories should be removed, or the cause of the faulty drive of the module board should be repaired, so as to deal with the problem according to the problem, until the LED display is repaired and used normally.
Read More
Seven tips to improve the heat dissipation of indoor LED displays.
In practical applications, increasing the heat dissipation of the indoor LED display not only effectively improves the efficiency of the heat dissipation of the LED display, but also saves power, which is more conducive to improving the life of the LED display. 1. The LED display uses a fan to dissipate heat. Using a high-efficiency fan inside the lamp housing to enhance heat dissipation is a relatively common method, and this method has low cost and good effect. 2. The LED display uses aluminum heat dissipation fins, which is the most common way to dissipate heat. Use aluminum heat dissipation fins as part of the housing to increase the heat dissipation area. 3. Air fluid mechanics uses the shape of the lamp housing to create convective air, which is the lowest cost method of enhancing heat dissipation. 4. Surface radiation heat dissipation treatment. The surface of the lamp housing is treated with radiation heat dissipation. The simpler is to apply radiation heat dissipation paint, which can take the heat away from the surface of the lamp housing by radiation. 5. Integrated heat and heat dissipation. With the use of high thermal conductivity ceramics, the purpose of heat dissipation of the lamp housing is to reduce the operating temperature of the LED high-definition display chip. Since the expansion coefficient of the LED chip is very different from the expansion coefficient of our commonly used metal heat conduction and heat dissipation materials, the LED chip cannot be directly welded. In order to avoid high and low temperature thermal stress damage the LED display chip. 6. The LED display uses a heat pipe to dissipate heat. Using heat pipe technology, the heat is conducted from the LED display chip to the heat dissipation fins of the shell. 7. The thermally conductive plastic shell is filled with thermally conductive material when the plastic shell is injection molded to increase the thermal conductivity and heat dissipation capa
Read More
How to choose LED display screen correctly?
The LED display is mainly used to display text, display pictures and video screens and so on. When you are choosing an LED display, the first thing you need to consider is what your actual needs and use are. Plan the location of the LED display in advance. Here we mainly include the choice of size, as well as the use In terms of environment, control, etc., when you use the venue, some LED displays will have certain restrictions. If you choose blindly, it may cause the use of the effect to be not very good. So, how to choose LED display? First: first determine whether the wall of the LED display screen is a load-bearing wall. Before making the display screen, make sure that the wall where the display screen is installed is a solid wall. If it is not a solid wall, a nine-centimetre board wall can be used to install the display screen, so that it can be heavy. In the process of actual communication with customers, if some installation environments are very high, some installation environments do not have elevators, and some installation environments have complex ground assembly environments, etc., you need to choose competent personnel to understand this business and let manufacturers see The scene will be better. Second: Determine the area, length and height of the LED display. You can install this display according to your own design length and height, or you can design it according to the golden ratio of 16:9 and 4:3. The size is mainly designed according to the purpose of the wall you install. This size also depends on how big your venue is, what is the closest viewing distance in the first row of meters, and the size is closely related to the venue and model. Third: Determine the model of the LED display. (1) The indoor display models are P1.25, P1.56, P1.667, P1.875, P2, P2.5, P3, P4. The model determines the clarity, the smaller the number, the clearer. The larger the model number, the cheaper, the smaller the more expensive. (2) T
Read More