LED Arrow Board

Current position : Home > LED Traffic Solution > Traffic products

  • Definition

    LED Arrow Board

    MODEL
    LEDs/head
    Power Consumption
    Remarks
    DXP-XXAAXX
    96
    70
    12V ONLY
    DXP-XXBAXX
    96
    75
    12V ONLY
    DXP-XXCAXX
    96
    80
    12V ONLY
    DXP-XXDAXX
    96
    80
    12V ONLY
    DXP-XXATXX
    28
    23
    12V/24V
    DXP-XXBTXX
    28
    25
    12V/24V
    DXP-XXCTXX
    28
    27
    12V/24V
    DXP-XXDTXX
    28
    27
    12V/24V

    Arrow Board+Small Trailer

    Controller



  • Functions of the Control Box

    Model:QS-AB01

    This control box can be used with the following arrow boards: DXP-XXAXXX, DXP-XXBXXX, and DXPCXXX.

    QS-AB01

    a——Output Cable: Connect to the arrow board

    b——Power Input Cable: There are four wires. Connect the pair with a red wire to the positive pole. Connect the pair with a black wire to the negative pole

    c——Fuse

    d——Power switch

    e——Status indicator

    Power : Power Indicator

    VOLT ALARM :On an arrow board with input voltage being rated 12V, when the voltage drops beyond 10.5V, the indicator LOW blinks and the arrow board is switched off in order to protect the circuit. When the voltage is higher than15V, the indicator HIGH blinks and the arrow board is switched off in order to protect the circuit. On an arrow board with input voltage being rated 24V, when the voltage drops beyond 22V, the indicator LOW blinks and the arrow board is switched off in order to protect the circuit. When the voltage is higher than28V, the indicator HIGH blinks and the arrow board is switched off in order to protect the circuit.

    DIMMER : Brightness control. You can set the brightness of the arrow boardby pressing this button DIMMER .

    AUTO: Not available in the models listed in this manual.

    100%: Full brightness

    50%: Half brightness

    25%: Quarter brightness

    f——Operation emulator

    Displays the work status of the arrow board in normal circumstances.

    When certain light head on the arrow board is abnormal, the indicator corresponding to the light head blinks rapidly.

    g——Alarm display mode:

    Alarm Signs
    Turn left or right
    Turn left
    Turn right

    NOTE:On arrow boards with the model numbers of DXP-XXAXXX and DXP-XXBXXX, there are no " " functions.

    If you happen to choose them, the default settings for them are "". Similarly, if you choose "", the default value is "".

    h——Function selections.

    F1 : Frequency of blinking: 2Hz, 1.5Hz, 1Hz.

    FLASH : Switch between flash or move.

    DOWN : Arrow board fold-down, not available in the current delivery.

    UP : Arrow board stretch-up, not available in the current delivery.

    Model:QS-AB02

    This model of control box can be used for arrow boards: DXP-XXDXXX

    QS-AB02

    The functions and operations of QS-AB02 are similar to those of the above described QS-AB01, except display mode selection and FLASH

    g——Display mode selection

    Alarm Signs
    Turn left or right
    Turn left
    Turn right

    FLASH ——There are two types of display in the "Turn left or right" mode.

    Type 1:blink together

    Type 2:alternatively

  • name size down